Table of Contents
Advertisement
Technical specifications
7.4 Technical data
7.4.2
Ambient conditions
Climatic ambient conditions
For permitted mounting positions, see section Preparing for installation (Page 18).
Temperature, tested in accordance with IEC 60068-2-1, IEC 60068-2-2 and IEC 60068-2-14
Operation, x6413E, without M.2 Module
Operation, x6413E, M.2 Module load max. 5W 0 °C to +50 °C applies to device for horizontal mount-
Temperature during storage/transport
Gradient
Relative humidity, tested in accordance with IEC 60068-2-78, IEC 60068-2-30
Operation
Storage/transport
Atmospheric pressure
Operation
Storage/transport
Multiplication factors for equipment ambient temperature of operation at altitudes up to
3000m, tested in accordance with IEC 61131-2:2017
Altitude
0 to 2000 m
3000 m
Equipment ambient temperature rating at 2000 m.
1
Atmospheric pressure and air density increases with decreasing altitude. Therefore utiliza-
2
tion of the derating factor for 0 m to 2000 m for altitudes below sea level is considered
conservative.
Mechanical ambient conditions
Vibration resistance, tested in accordance with IEC 60068-2-6
Operation
62
2
0 °C to +55 °C applies to device for horizontal mount-
ing positions
ing positions
-20 °C to +70 °C
•
Operation: Max. 10 °C/h
•
Storage: 20 °C/h, no condensation
8% to 85% at 30 °C, no condensation
Gradient ≤ 10℃/h
8% to 90% at 25/55 °C, no condensation
Gradient ≤ 20℃/h
1080 to 627 hPa, corresponds to an altitude of -1000
to 3000 m
1080 to 660 hPa, corresponds to an altitude of -1000
to 3500 m
Derating ratio for temperature
1.0
0.9
Except DIN-Rail:
•
5 to 8.4 Hz: 3.5 mm
•
8.4 to 500 Hz: 9.8 m/s²
DIN-Rail:
•
10 to 58 Hz: 0.0375 mm
•
58 to 200 Hz: 4.9 m/s²
Operating Instructions, 09/2021, A5E51366275-AA
1
SIMATIC IPC327G
Advertisement
Table of Contents
