Level Sensors - Genie GR-12 Service Manual

May 2018
2-3

Level Sensors

The Electronic Control Module (ECM) is
programmed to deactivate the lift and drive
functions and activate an alarm when a signal is
received from the level sensor.
The tilt alarm sounds when the incline of the
chassis exceeds 1.5° to the side and 3° to the front
or rear.
Use the illustrations to verify which type of level
sensor is installed and perform the procedure that
is appropriate for your machine.
Procedure 1
Part No. 1275811GT
1 X axis
2 Y axis
GR ™ • QS ™ R • QS ™ W
Service Manual
Ground Controls
Procedure 2
Procedure 2
51