Seat MEDIA SYSTEM PLUS Owner's Manual page 43

● Press the Configuration function button
to configure the WLAN network.
Function button: function
: To switch the WLAN network on/off.
Mobile hotspot

: To select the code type (encryption),
Security level
choose or
WAP2 No security level
ter network key is automatically generated.
: Network key automatically generated.
Network key
Press the function button to manually change the
network key. The network key must have a minimum
of 8 characters and a maximum of 63.
: Name of the Infotainment system WLAN net-
SSID
work.
: Activate the check-
Do not send network name (SSID)

box to deactivate the visibility of the WLAN network.
To save the changes made to the mobile hot-
spot configuration, press the
STORE
Audio and Media Mode
DVD video mode
3 Only available for the model: Navi System Plus
. An 8-charac-
DVD main menu.
Fig. 27
button.
Fig. 28 DVD mode control menu.
DVD video regional code
Quite often, the playback of DVD video is
limited to certain regions (for example, to the
US and Canada) by so-called "region codes".
These DVDs can only be played on units that
are coded for the same region.
The unit's DVD drive is configured to read the
regional code for the region in which the ve-
hicle was originally sold.
Start DVD mode
● Insert a compatible DVD in the DVD drive.
The reading of DVD data may take a few sec-
onds.
The DVD's "intro" (short initial sequence) is
played. Next, the different DVD menus are
displayed.
Controlling the DVD menu
● Briefly touch the screen to activate the
function buttons in the DVD mode main
›››
menu Fig. 27.
Function button: function
Display and selection of the source.
SOURCE
To display the control menu and return to the
DVD
›››
MENU main DVD screen Fig. 28.
Chapter display.
A
Displays play time duration and remaining
B
play time.
: Move the control menu window.

: Minimise the control menu window.

C
: Maximise the control menu window.

: Close the control menu.

»
41