Operating Procedures - Raymarine Ray215e Owner's Handbook Manual

4-10
8. Digital Selective Calling (DSC) Operation
These functions include Individual Ships Call, All Ships Call, Distress
Call, Group Call, and DSC logging capability.
Note: An MMSI number is required to operate the DSC equipment
in this radio. You can program the MMSI number yourself one time
only, if permitted in your region, using the Menu Operation described
in Section 4.7.4.2 or you can have your Raymarine dealer program
the number for you.
9. NMEA Positional Data Reception
Positional information from external equipment is obtained using
the NMEA 0183 interface.
10. Remote Operation
When both a Minimum Function Handset and Full Function Handset
are connected, the RAY215E can be controlled by either handset.
When the Full Function Handset is out of its cradle, it has priority
over the Minimum Function Handset. When the Full Function
Handset is in the cradle, the Minimum Function Handset has priority
and BASE appears on the handset's LCD.
If you need to make an emergency call with the Minimum Function
Handset while the Full Function Handset is out of the cradle, press
and hold the DSC/PRI key. The Minimum Function Handset regains
priority control and OVERRIDE appears on the Full Function
Handset's LCD.
11. Intercom Function between Handsets
Intercom mode enables conversation between a Minimum Function
Handset connected to the front of the base station and a Second Station
Full Function Handset connected to the to the rear of the base station.
12. Reduced Receiving Sensitivity (Local Mode)
This function decreases receiver sensitivity in high traffic areas to
decrease unwanted reception.
4.6

Operating Procedures

With the Full Function Handset, all operations can be made on the Handset
except turning ON/OFF the base station and adjusting the sound volume
of the External Speaker.
Operation with Full Function Handset