Modifying The Mmsi Number List (Phnbook) - Raymarine Ray215e Owner's Handbook Manual

4-46
4.7.3.3

Modifying the MMSI Number List (PHNBOOK)

This operation is used to modify the "phonebook" lists of MMSI numbers
used for DSC Individual Calls. Two lists are available: one for Ship stations
and one for Shore stations. Each list allows you to register the MMSI
number and nickname for up to 20 Ship and 20 Shore stations.
Note: The 20 Ship stations and 20 Shore stations in this phonebook are
separate from the 10 phonebook entries stored in the base station (see
Section 3.5.18.2). All 50 entries are available for you to use.
1. As described in Section 4.7.3 DSC Operation above, select the DSC
operation PHNBOOK.
2. Press the ENT key to initiate the process. The 7-segment display shows
Phb and the dot matrix display shows SHIP.
3. Use the SQ UP/DOWN key to select between SHIP or SHORE.
4. Press the ENT key to turn to submit your selection.
Modifying the List of Ship Stations
In this operation, a ship is registered (added) to or deleted from the
phonebook list for ship stations.
1. When SHIP is displayed, press the ENT key. The 7-segment display
shows SHP, while the dot matrix display shows ENTRY.
2. The list can hold a maximum of 20 entries. If a list is already full or if
the list becomes full during this process, the indicator PHNBOOK IS
FULL is displayed.
3. To delete an item from the list, use the SQ UP/DOWN key to select
DELETE and press the ENT key. If no station has yet been registered,
the message PHNBOOK IS EMPTY is displayed.
Operation with Full Function Handset
ENT