Raymarine Ray215e Owner's Handbook Manual page 112

Operation with Full Function Handset
Pressing the following keys initiate the corresponding operation:
K K K K K eys eys eys eys
eys
0 - 9 keys
ENT key
CLR key
6. Input your MMSI number using the numeric keypad.
7. Press the ENT key. The message ENT - ACCEPT, CLR - EXIT scrolls
across the display.
8. Press the ENT key to submit the number. The message ENTER MMSI
NO. AGAIN is displayed.
9. Press ENT. The nine underscore placeholders appear once more.
10. Again input the MMSI number with the numeric keypad.
11. Press ENT to submit. If the second MMSI number you input matches
the first, the message ENT - ACCEPT, CLR - EXIT is again displayed.
Note: If the two MMSI numbers don't match, the message MMSI NO.
NOT MATCH PRESS ENT scrolls across the display. Press ENT to exit
the Menu mode and try again from step 1.
12. Press ENT to verify. The message ENT - STORE, CLR - EXIT is
displayed.
13. Press ENT one last time to register the MMSI number in memory.
Operation returns to the mode before the Menu mode began.
To exit without making changes at any time, press and hold CLR for 3
seconds.
Action Action Action
Action Action
Changes the flashing numeric value, then advances to the
next digit's place.
Advances the (flashing) subject item to the next one
without changing the numeric value. Advances to the next
screen after entering the last (ninth) digit.
Returns to the previous subject item. Pressing and holding
for 3 seconds exits the operation and returns to the mode
before the operation began.
4-57