Raymarine Ray215e Owner's Handbook Manual page 47

3-24
7. Enter all 9 digits of the MMSI number in the same way.
Note: The operation is cancelled if the 16 key is pressed or if no keys
are pressed for 60 seconds during any part of this process.
8. Once the 9th digit has been entered and accepted, the RAY215E plays
back the 9 digits just entered for proper entry verification.
If the number is incorrect, press the DSC/PRI key once and release.
The radio will revert to the beginning of the entry process to start over
again. This step can be repeated as many times as required until the
number is entered correctly.
9. When the MMSI number is verified as correct, press the SCAN/MEM
key. A letter appears in the small channel display.
10. If you wish to assign this letter to the Other Ship's MMSI, press DSC/
PRI.
11. If you wish to assign a different letter to the Other Ship's MMSI,
rotate the Channel Selection Knob until the desired letter is displayed.
12. Press DSC/PRI to store the MMSI number/letter assignment into the
phonebook.
Up to ten Other Ship's numbers can be stored in the phonebook. The
letters available are as follows:
You must note what letter you assigned to the MMSI number because
only that letter appears on the LCD when you are retrieving it.
Note: No data is stored in memory when a wrong key operation or an
interruption of power occurs during the entry procedure.
The operation is cancelled if the 16 key is pressed or if no keys are
pressed for 60 seconds during any part of this process.
To delete an MMSI number from the phonebook:
1. Press and release the DSC/PRI and D/L / I.C. keys simultaneously.
2. Press and release the SCAN/MEM key.
3. Rotate the Channel Selection Knob until the letter representing the
MMSI number to be deleted is displayed.
Operation with Minimum Function Handset