Raymarine Ray215e Owner's Handbook Manual page 79

4-24
Transmitting an Individual Call
To call another ship, you must select the Working Channel and a specific
MMSI number. The MMSI number is selected either manually or from a
Phonebook list of preprogrammed numbers specified using the MENU
function. To cancel the call, press and hold the CLR key for 3 seconds.
Press the INDV key to initiate the call data setup operation. After setting
the call data, press the PTT key to send the call.
To Make an Individual Call to Ship (ship-to-ship):
1. Press the INDV key. Ind appears on the 7-segment display and the
DSC indicator is displayed. Pressing the SQ UP/DOWN key alternates
between SHIP and SHORE.
2. Select SHIP and press the ENT key.
3. Scroll with the SQ UP/DOWN keys to select the method for inputting
the MMSI number, either from the Phonebook or manually. Press ENT.
4. Select the MMSI number.
BY PHONEBOOK:
Scroll with the SQ UP/DOWN keys, select the name associated with
the desired MMSI number, and press the ENT key. If the MMSI number
is not listed in phonebook, the display reverts to manual input.
Operation with Full Function Handset
INDV
ENT
ENT
Alternates with each click
of the SQ UP/DOWN key
Alternates with each click
of the SQ UP/DOWN key
Use SQ UP/DOWN key
to scroll through list of
MMSI nos./nicknames