Disposal of packaging materials
The packaging protects the appliance from damage
during transport. The packaging materials have
been selected for their environmental friendliness
and ease of disposal, and are therefore recyclable.
Dispose of packaging materials that are no longer
needed in accordance with applicable local regu-
lations.
Power supply: receiver
The receiver is plugged into a properly installed
mains power outlet and does not require batteries.
Inserting/replacing the batteries
Detach the mounting plate q from the transmitter.
♦
Grip the battery compartment cover 0 on both
♦
tabs and pull it off .
♦
Insert a 3 V battery, type CR 2032, into the
battery compartment 9. The side of the battery
marked with a "+" must be facing upwards.
SFKS 2 B1
Returning the packaging into the material
cycle conserves raw materials and
reduces the amount of waste generated.
GB │ IE │ NI
│
11
■