Selecting The Ringer Melody; Synchronising The Sender And Receiver - Silvercrest SFKS 2 A1 Operating Instructions Manual

Selecting the ringer melody

GB
There are 36 different ringer melodies stored in the
IE
appliance.
♦ Press the melody select button
♦ Stop the selection when you hear the desired melody.
The appliance will use the last-played melody.

Synchronising the sender and receiver

The transmitter and receiver of this wireless doorbell
system can communicate with each other via a number
of different codings. This means that you can operate up
to 5 transmitters with one receiver. In addition, you can
extend the wireless doorbell system with any number of
receivers. This is only possible if the sender and receiver
within a system are working on the same frequency,
however. For this, you must synchronise the appliances
as follows:
♦ Press the synchronisation button
receiver.
♦ Now press the ringer button
If the synchronisation has been a success, the receiver
notifies you of the programmed call signal. Should the
receiver not react as described, repeat the synchronisation.
14
.
on the
on the transmitter.
SFKS 2 A1