Figure 39: Iar Embedded Workbench Installation Start; Figure 40: Iar Embedded Workbench - Dongle Drivers Installation - Redpine Signals WyzBee User Manual

6) Click Next in the new window and then click Install to start the installation process.
Figure 40: IAR Embedded Workbench Installation Start
7) Wait for the installation to be completed. You will be requested to remove any USB
dongles connected to the PC. Remove them and click Yes.
Figure 41: IAR Embedded Workbench – Dongle Drivers Installation
8) This will start the installation of the dongle drivers. Once completed, select the "Launch
IAR Embedded Workbench for ARM" option and click Finish to complete the
installation of IAR Embedded Workbench.
WyzBee™ WyzBee™
User Manual User Manual
Version 1.2 Version 1.2
Page 30