Configuring Coide For Wyzbee; Figure 27: Gcc Toolchain Path For Coide; Figure 28: Coide Version; Figure 28: Coide Configuration Button - Redpine Signals WyzBee User Manual

6) CoIDE doesn't come with an integrated GCC compiler. Download and install the
relevant GCC toolchain for Windows from
7) Once the installation of the GCC Toolchain is completed, open CoIDE and click on
"Select Toolchain Path" under "Project". In the new dialog box that opens, enter the
path where the GCC Toolchain was installed.
8) To verify the downloaded version,click Help -> About CoIDE
4.2.2

Configuring CoIDE for WyzBee™

Follow the steps below to configure CoIDE for WyzBee™.
1) Open CoIDE and click on the Configuration button.
2) In the new window that opens, ensure that the settings on each tab match the settings
in the images below.
WyzBee™ WyzBee™
User Manual User Manual
Version 1.2 Version 1.2
https://launchpad.net/gcc-arm-embedded/

Figure 27: GCC Toolchain Path for CoIDE

Figure 28: CoIDE Version

Figure 29: CoIDE Configuration Button
Page 24