Table of Contents
Advertisement
Section 1 - Installation: Equipment Assembly
TO AIR
MANIFOLD
6.
Install thermocouple at tee fitting.
a. Feed 12' line through hose.
b. Nut & Ferrules will lock into fitting.
c. Tighten nut 1-1/4 turns past finger tight.
d. Plug thermocouple into control box.
Note: When replacing thermocouple p/n 22074-00 use kit
p/n: 21214-01.
7.
a. Connect hose assembly to the front of the unit. The
fittings are sized differently and will attach only one
way. (match like sized fittings).
b. Connect twist-lock plugs. (see hose installation)
8.
Connect supplied trigger air line to the
air line on the hose assembly.
5
Advertisement
Table of Contents
