General Information; Identification Data And Plates On The Device - Harken LokHead 500 User Manual

General Information

IDENTIFICATION DATA AND PLATES ON THE DEVICE

Each device is identified by a CE plate on which the reference data of the device are inscribed indelibly� Always quote these
references when contacting the manufacturer or service centres�
via Marco Biagi, 14
22070, Limido Comasco (CO) - Italy
www.harken.com
(+39) 031 3523511
i
1� name of manufacturer
2� name of product and model
3� manufacturer's identification data
4� CE mark according to 2006/42/CE
5� serial number in format:
S XXXXX
XXXXXXXXX
last two numbers of the year of manufacture of the device (e�g� 15 = the year 2015)
6� pictogram instructing you to read the manual before using the
device
7� safety information on the diameter of the rope to use:
minimum 10 mm, maximum 12,7 mm: this rope must be EN
1891 certified
8� indicator of the Max Working Load (MWL) of the device, with
specific load for lifting load and lifting person
The CE plate is on the skirt of the device (see figure on right)
6
Winch LokHead 500
Compliant:
EN 1496:2007 class B
rope diameter/diametro fune:
ø 10-12,7 mm EN1891
Max Working Load (MWL):
500 kg
Lifting Load
1
3
6
EN 13157:2009
Lifting Person 240 kg
2
4
7
8
Winch LokHead 500
via Marco Biagi, 14 Compliant:
22070, Limido Comasco (CO) - Italy EN 1496:2007 class B
www.harken.com
(+39) 031 3523511 rope diameter/diametro fune:
ø 10-12,7 mm EN1891
i
Max Working Load (MWL):
Lifting Load 500 kg Lifting Person 240 kg
ENGLISH
INLH500
Serial No. / N. di serie
5
INLH500
Serial No. / N. di serie
EN 13157:2009
04-04-16