Winch LokHead 500
LOKHEAD WINCH, PLATE AND PLATE ADAPTER INSTALLATION
Positing the control lever
1� Untighten the knob screw�
3� Tighten the control lever screw�
Install the LokHead winch and plate adapter fixing the plate with four(4) M12 bolts, washers and nuts on a flat surface, which
whithstand a load equal of 2400 kg�
It is installer's responsibility to choose correct bolts, taking into account loads they will have to withstand�
Harken assumes no responsibility to incorrect installation of winch and plate adapter or for use of incorrect mounting bolts�
18
2� Position the control level using the screw supplied with
transformation kit�
Install the winch on the plate following the procedure described in
the Lokhead Winch Installation chapter� Fix surely the plate to the
plate adapter with the self-locking nut�
ENGLISH
04-04-16