Using The Device - Checking The Device Before Use - Harken LokHead 500 User Manual

To the Anchorage Point

USING THE DEVICE - CHECKING THE DEVICE BEFORE USE

Before and after every use, visually inspect the Winch LokHead and plate for signs of wear, damage or failure� If such signs are
present, do not use the device� If the worn or defective parts are not immediately replaced, the manufacturer will assume no
responsibility for resulting damage or accidents�
Check the movement of the rope grab cover�
04-04-16
To the load
Check that the rope grab knob is working by rotating the knob and
releasing it�
ENGLISH
Winch LokHead 500
23