To install the winch you must remove the winch skirt and use five (5) M6 Hex Head (HH) Bolts (Galvanized, 10�9 UNI EN ISO 4014:2003)�
Tools needed:
1� Remove the skirt with the help of the screwdriver placed as
shown by the symbol
Note: 1/4" Hex Head bolts will not work for this procedure�
04-04-16
One medium flat-bladed screwdriver
2� Take off the skirt and position the 5 M6 hexagonal headed bolts
in their holes
3� Reposition the skirt in housing and press down it to position
correctly�
Note: Make sure skirt is correctly clipped on to base of winch�
ENGLISH
Winch LokHead 500
15