Table of Contents
Advertisement
Winch LokHead 500
USING THE DEVICE - CHECKING THE DEVICE BEFORE USE
WARNING!
Before each use, visuallly inspect the LokHead winch for signs of wear, damage or failure. If such
signs are present, do not use the device. if the worn or defective parts are not immediately replaced,
the manufacturer will assume no responsibility for resulting damage or accidents.
WARNING!
Before each use inspect winch and self-tailing jaws for degradation, cracks, or wear that may affect
locking strength and operation. Check lifting rope to make sure that it is free from wear. If in doubt,
replace with a suitably strong rope.
WARNING!
Before each use check winch base securely fastened to plate.
Failure to use correct number and length of mounting fasteners and/or failure to tighten them
correctly can result in winch pulling off suddenly and unexpectedly during high loads which may
cause load to drop, possibly resulting in severe injury or death.
WARNING!
Before each use check the winch drum cannot be turned by hand counter-clockwise.
LIFTING LOAD
WARNING!
Keep fingers, loose clothing, hair etc away from winch. Area around winch handle shouldd be kept
clear of people and objects at all times.
1� Feed the rope through the pigtail� Start at base and wind rope
onto drum in a clockwise direction�
24
2� Ensure that the rope does not override (overlap) on winch�
ENGLISH
04-04-16
Advertisement
Table of Contents
