Table of Contents
Advertisement
LOWERING LOAD
To lower the load with one hand grasp the rope�
With the other hand, turn the knob clockwise to allow the rope to slip on the winch drum and permit a controlled descent� To
adjust descent speed, manually control the speed at which the rope leaves the winch by holding rope with arm out and bringing
it in towards the winch drum�
To stop the descent, release the knob�
MAINTENANCE
NOTE!
A formal inspection of the winch must be performed at least annually by trained personell. The
inspection should be recorded in an inspection and maintenance log.
Wash
Wash winch frequently with fresh water�
Do not allow cleaning products or other caustic solutions to come into contact with winch, especially anodized, chrome-plated,
or plastic parts� Do not use solvents, polishes, or abrasive pastes on logos or winch stickers�
Maintenance Schedule
Winch must be completely overhauled, cleaned, and lubricated at least every 12 months� Harsh environment and/or heavy use
may require more frequent maintenance�
After inspection, replace worn or damaged components with genuine Harken parts�
NOTE!
Do not replace or modify winch with a part that was not designed for it.
04-04-16
WARNING!
To lower the load, in case of difficulties,
unwind the rope, and reduce the turns
to not less than 2 wraps, until you have
the optimal configuration. Do not take
rope turns off winch drum until rope is
completely unloaded.
ENGLISH
Winch LokHead 500
27
Advertisement
Table of Contents
