Dryer Function; Service Manual Uk English - Swann STCL407WUK Service Information

Indesit Company
FUNCTIONS DESCRIPTION
The Drying Guide allows you to consult a user friendly table of fabric types and load capacities.
The PROGRAMME knob sets the programme: rotate it until the indicator is pointing to the programme
you want to select. This will also power the dryer to the ON state. This replaces the On/Off button
found on previous models.
When either 'OFF' (Hotpoint models) or the knob marker '()' (Indesit models), is positioned in the 12
o'clock position, it turns the machine Off and Cancels the Programme.
The OPTION buttons/lights select available options for your selected programme. The lights indicate
that the option has been selected.
The START/PAUSE button/light starts a selected programme. When you press this button there
will be one beep and the progress lights will flash to confirm the action. When a programme is running,
holding this button in pauses the programme and stops the dryer.
The light is green when programme is running, flashing amber if the programme has been paused or
flashing green if on stand-by waiting to start a programme.
Stand-by Mode
30 minutes after a programme has finished, if the dryer is still 'On' and no buttons have been touched,
the dryer will go into Stand-By mode. The LEDs and display will switch off. To reactivate and to remove
the dryer from Stand-By mode, turn the Programme Selector to position "1".
It will take a few seconds to recover from "Standby".
Another programme can be started or the dryer switched off by turning the selector to the OFF position.
The Progress or Delay lights show you the status of the programme, or the delay time when they
flash. During a delayed start the lights flash to show the delay selected. When (not flashing) they show
each stage of the programme by the corresponding light turning on.
The Empty Water indicator light signals that the water container should be emptied. The light will take
a few seconds to go out after replacing the empty water container, the dryer must be running for this to
happen. Note: If the water bottle fills the indicator light flashes, the heat is turned off and your clothes
will not dry.
The Clean Filter light gives you a reminder before every programme that it is essential to clean the
filter every time the dryer is used.
The Clean Condenser light gives you a reminder that it is essential to clean the condenser at regular
intervals.
Service Manual UK English
20 of 34