Upgrade Menu - Promax -10 Manual

RM-010 Remote control for PROMAX-10 / 8+ / 8

2.5 Upgrade menu

This menu allows to upgrade current PROMAX-10/8+/8 control software. The
updating process lasts for 30 minutes approximately. When this window opens it
shows the available upgrades for the analyser model which has been previously
selected by means of the Model menu. The upgrade process takes about 30 minutes.
Before starting the up date it is important to verify that the PROMAX-10/8+/8 battery is
fully charged and the PROMAX-10/8+/8 is not in auto-power off mode, in order it does
not turn off during the updating process. Never disconnect the Cable TV analyser from
the serial port before closing all program windows and exit completely the RM-010
program.
12/2002 Page 13