Configuring Hsb2 Plus (Pathfinder) Series Displays - Raymarine DSM30 Installation Manual

20
Configuring hsb
2
hsb PLUS network cables have a triangular 3-pin connector on both ends. When
using the DSM with an hsb
3-pin hsb
The hsb
display is the last device on the network, an inline terminator is installed on the
cable where it connects to the display. The network connection in the DSM,
however, is internally terminated; it does not require an inline terminator.
Because the sounder module is internally terminated, it must be
installed at the end of the hsb
terminator on the DSM end of the network. If an hsb
used, connect it to a display and not to the DSM.
Sounder Module
R69081
Configuring an hsb
Sounder Module
R69081
Configuring an hsb
2
PLUS (Pathfinder) Series Displays
2
2
adapter between the sounder module and the network cable.
2
system must be terminated at both ends of the network. If a PLUS Series
4-pin to 3-pin
2
hsb adapter
3-pin to 3-pin hsb
2
PLUS System - Single Display
4-pin to 3-pin
2
hsb adapter
R55040
2
3-pin hsb cable
2
PLUS System - Multiple Displays
DSM300 and DSM30 Installation Manual
PLUS Series display, connect the supplied 4-pin to
2
network. You must not use an inline
hsb 2 PLUS Series Display
hsb
R58117
Terminator
2
cable
hsb PLUS Series Display
2
2
hsb
Splitter
3-pin hsb
2
splitter is
2
Inline
hsb PLUS Series Display
2
2
hsb
R58117
Terminator
2
cable
D9607-1
Inline