Trackpad And Cursor - Raymarine Chartplotter Owner's Handbook Manual

1-4

Trackpad and cursor

The trackpad has several functions:
• To move the cursor around the chart screen.
• To select an item from a pop-up menu or database list.
• To adjust a control setting.
• To enter names in database lists .
Press the corresponding edge of the trackpad to move the cursor horizontally,
vertically or diagonally; the longer you press, the faster the cursor moves. The
current cursor position is shown in the status bar at the top of the screen.
Note: During many operations you cannot move the cursor around the screen,
eg. whilst a function bar is displayed, the cursor is used exclusively for
selection.
The cursor is used to:
• Select a position on the chart.
• Select, access and, if valid, move an item, eg. a waypoint, on the chart.
• Pan the chart display.
128 nm
RayChart 420/420D Chartplotter
Status Bar
MOB
GOTO key
GOTO
PAGE key
PAGE
CLEAR key
CLEAR
RANGE key
ENTER
ENTER key
Trackpad
POWER key
Navionics
Nav-Chart
compartment
Cursor
Primary
Function Bar
D4667_1
®