Key Beep; Digital Compass; System Diagnostics - Raymarine A65 Owner's Handbook Manual

Chapter 2: General Operation and System Setup

Key Beep

Controls whether or not the keys sound a tone when you press them. Select ON or
OFF. The default is ON.

Digital Compass

This feature simulates a pedestal-style compass that displays your current course
over ground (COG) or heading (HDG) and the bearing to the active waypoint.
Select from the following options:
• OFF
The compass is not displayed
• COG
The compass is displayed, based on your course over ground
• HDG
The compass is displayed, based on heading (if heading sensor is installed)
The centerline indicates either your course (amber) or heading (red) while the blue
line represents the bearing to the waypoint. When on the right course, the two
indicators line up and their combined color becomes green (using COG) or
magenta (using HDG). Double arrows indicate the direction to steer to the target.
If you select HDG when no heading sensor is connected, the compass
automatically displays the amber COG line instead.
Steering Arrows
Compass directions (N, NE, NW, etc.) have a superscript character that represents
the bearing mode you selected in System Set Up: M for Magnetic and T for True.

2.12 System Diagnostics

This sub-menu is for diagnostic use by authorized dealers. All menu items default
to OFF. You should not make any adjustments to these settings.
Bearing to Waypoint
(blue)
Centerline
COG (amber)
or HDG (red)
39
D8125-2