Table of Contents
Advertisement
Overview
Caution
2
The HP J3108A FDDI Module is designated as a module requiring "high
power". Installing more than two high-power modules in the HP
J3100A Switch 2000 may exceed the switch's power capabilities and
is not supported.
If necessary, you can "hot-swap" one FDDI Module for another; that is, replace
one module with another of the same type without rebooting the switch.
However, if you replace one module type with a different module type (such
as replacing an Ethernet Module with an FDDI Module), you must reboot the
switch after making the replacement.
Advertisement
Table of Contents
