QRS PNO3 User Manual page 32

Q
RS PNO 3 User Guide
Record Setup
Set Record Parameters
The PNOscan Optical Recording Strip comes standard with four x 22 sensor strips. This gives you a total of 88 notes which fits the
typical piano allowing for alignment adjustments. Each sensor has its own MIDI address and number. The MIDI number is
associated with the General MIDI note assignment specification that ranges from 0-127.
The optical sensor reads the movement of the key over 1000 times per second and creates a profile of its movement. It then
creates an associated MIDI note on/off plus velocity over that profile. The measurement window is set here.
2. Play every note on your keyboard one at a time.
1. Select Reset Calibration
Then you are done
Technical Support - 800-247-6557
QRS Music Technologies, Inc.
32
www.qrsmusic.com