Wi-Fi Extender; Buttons And Leds - QRS PNO3 User Manual

NETGEAR EX6100 WI-FI EXTENDER (AC750)
NETGEAR EX6100 WI-FI EXTENDER (AC750)
LED above the N in Netgear is
the Router Link LED - this
indicates status between the
extender and the router or
access point
LED above the R in NETGEAR is
the Client Link LED. It indicates
the connection between the
extender and a computer or
mobile device.
Power LED
WPS LED
Blinking Arrows
QRS Music Technologies, Inc.
3
QRS PNO User Guide

Buttons and LEDs

Solid Green Best Connection
Solid Amber Good Connection
Solid Red Poor Connection
Off No Connection
Solid Green Best Connection
Solid Amber Good Connection
Solid Red Poor Connection
Off No Connection
Solid Amber The extender is booting
Solid Green The extender is powered on
Off The extender is powered off
Solid Green Wi-Fi security is enabled (WPA or WPA2)
Blinking Green A WPS connection is in progress
Off Wi-Fi security is not enabled
Indicate that the extender or client are not in an
optimal reception location.
13
When green it is talking to your
home network, when amber it
has a weak connection to your
WiFi Network
When Green a device is logged
into the Netgear, usually we will
be logged into your homes
network.
Technical Support - 800-247-6557
www.qrsmusic.com