QRS PNO3 User Manual page 27

Q
RS PNO 3 User Guide
Performance Setup
Set Your Pedals Dynamics
Start Stop Preplay Time Pedal Attack What it takes to Pedal Hold - What it takes Pedal Retro -
Test Test Default 0 move the pedal to hold the pedal down controlled release
Increment Attack so the dampers raise Adjust Hold only enough so dampers Retro can be as high as the hold but
above the strings without noise. stay raised - it should be close to default should be used only to quiet the drop
Technical Support - 800-247-6557
QRS Music Technologies, Inc.
27
www.qrsmusic.com