Safety Check; Instruction To Assembly Parts; Xii. Safety Check - Panasonic NR-B203G-S7 Service Manual

XII. SAFETY CHECK

Make sure that the refrigerator repaired is secure and works properly.
1. INSULATION TEST
1 Connect the Service Cord pin to each
other.
2 Connect the grounding pin and insulation
tester to service cord of Refrigerator.
3 Connect positif pin Insulation tester to
body of Refrigerating Unit.
4 Switch on the power of insulation tester.
( Standard: 500 V/ DC, > 10 Ohm ).
2. PUNCTURE TEST
Puncture test
Insulation test
1 Connect the Service Cord to each other.
2 Place the refrigerator on the wooden surface.
3 Connect the pin of ground puncture test to the
Service cord of Refrigerator.
4 Connect the Service Cord Puncture test into Elctric
source.
5 Setting Puncture Test at 1500VAC, 5 mA,
1 minute.
6 Connect the high voltage cord's pin to the cabinet
and switch on puncture test.
-18-