Advertisement
I. SAFETY CAUTIONS FOR REPAIRING
When you repair refrigerator, please kindly take care of following cautions.
a) Warning
Before repairing unit, unplug power supply cord
Before you repair refrigerator, unplug the power supply cord.
●
Use authentic parts when repairing
When you replace the parts, please use authentic parts to replace defective parts.
●
Caution during brazing
When you use touch for brazing, please ensure ventilation. Otherwise, you will be poisoned by
●
carbon monoxide.
Pay attention to using refrigerant
● If refrigerant touches fire, the gas becomes poisonous gas.
Pay attention to getting electricity shock
When you check the voltage of terminal, please do not touch the electricity parts terminal.
●
When you replace the parts, please wait three minutes at least for discharging capacitor.
●
Check safety after repairing
Check the screws, parts, lead wires to take in place.
●
And check the repairing portion whether circumferential parts are damaged or not.
●
Check insulation resistance between power supply cord and earth.
●
When install refrigerator, check condition of power supply cord and plug.
●
Wipe off the dust on plug.
●
Cutting and seal the electric device carefully.
●
b) Caution
Watch the hot parts
During operation and after operation, compressor and pipes are hot.
●
Also, under these condition, heater are hot.
●
Do not burn your fingers when you touch it.
●
Pay attention to refrigerant
Do not touch liquid refrigerant.
●
Otherwise, your hands may be burnt.
●
Pay attention to edge of parts
Otherwise, your fingers may be cut.
●
Pay attention to fins of evaporator and condensor
Otherwise, your fingers may be cut.
●
Before transportation, adjust adjustable bolt
Otherwise, the floor may be damaged.
●
Do not touch the pipe after brazing
Otherwise, your hands may be burnt.
●
-3-
Advertisement
