Electra WNG 25 DCI INV Service Manual page 6

1.7 Outdoor Unit
The WNG DCI INV outdoor units can be installed as floor or wall mounted units by
using a wall supporting bracket. The metal sheets are protected by anti- corrosion paint
work allowing long life resistance. All outdoor units are pre-charged. For further
information please refer to the Product Data Sheet, Chapter 2.
ONG 25 DCI
ONG 35 DCI
Outdoor Unit Features:
Base Heater
Outdoor Fan
M2L cable Port
1.8 Tubing Connections
Flare type interconnecting tubing to be produced on site.
For further details please refer to the Installation Manual, Chapter 9.
1.9 Accessories
MIU (WNG)
MIU (K)
RS485 Adapter
Base heater
M2L cable
For further details please refer to Optional Accessories, Chapter 17.
1.10 Inbox Documentation
Each unit is supplied with its own installation and operation manuals.
Service Manual – WNG DCI
Features
Display
Item
MODBUS Interface Unit
MODBUS Interface Unit
To be used as an interface
with RCW or µBMS remote
controllers (required for
WNG units only)
ONG 25,35, DCI
3 LED's
Optional
Variable Speed DC Inverter
No
Description
Revision 0
CONTENT
INTRODUCTION
1-3