Table of Contents
Advertisement
Using a USB Memory Device to Save/Load Registered
Data
Menu options data that has been registered in the machine can be saved in a USB memory device (export). Data that is
saved on a USB memory device can also be registered in the machine (import). Data exported from this machine can
be imported to another machine of the same model. So you can easily copy a variety of settings data to multiple
machines.
Saving Registered Data to a USB Memory Device(P. 446)
Loading Registered Data from a USB Memory Device(P. 448)
Do not turn OFF the machine until the export/import process is complete
●
It may take a few minutes to complete the process. If the machine is turned OFF during the process, it may
result in damage to data or the machine.
Do not operate the machine during the export/import process
●
Before exporting/importing, check that no operations such as printing documents are currently in progress.
●
For the settings that cannot be imported or exported, see
Available USB Memory Devices
You can use USB memory devices with the following format styles.
●
FAT16 (memory capacity: up to 2 GB)
●
FAT32 (memory capacity: up to 32 GB)
●
Do not use non-standard USB memory devices. You may not be able to export/import data properly
with some USB memory devices.
●
Do not connect anything other than a USB memory device. USB memory devices cannot be connected
via a USB hub or an extension cable.
●
Do not use USB memory devices with special functions such as built-in security functions.
Maintenance
Setting Menu List(P. 307) .
445
0U6X-0E3
Advertisement
Table of Contents
