Table of Contents
Advertisement
Using Up Toner
Symptoms like the following appear on printouts when toner runs low.
Streaks appear
Perform the following procedure when any of the above symptoms appears. They will allow you to use up all of the
toner in the toner cartridge. Performing this procedure may allow you to get fine print again for some time until the
toner is used up. If the symptom does not improve after you perform the following procedure, replace the toner
cartridge (
How to Replace Toner Cartridges(P. 428) ). Before starting the procedure, read the precautions given in
Maintenance and Inspections(P. 9) and
1
Open the front cover while holding down on the button.
2
Remove the toner cartridge.
3
Shake the toner cartridge five or six times as shown below to evenly distribute the
toner inside the cartridge.
Maintenance
Partially faded
Uneven density
Consumables(P. 10) .
426
0U6X-0H2
Advertisement
Table of Contents
