English; Fl3Wbd_Manual_041012.Indd - Black & Decker FL3WBD Instruction Manual

6
5
4
3
1
12

FL3WBD_Manual_041012.indd 2-3

7
8
9
10
11
2
10 (UK Version)
13
14
2 2

ENGLISH

INSTRUCTION MANUAL
INTENDED USE
Your Black & Decker LED spotlight has been
designed for providing illumination for leisure use.
This product is intended for consumer use only.
SAFETY INSTRUCTIONS
Warning! When using battery-powered appliances,
basic safety precautions, including the following,
should always be followed to reduce the risk of
fire, leaking batteries, personal injury and material
damage.
• Read all of this manual carefully before using the
appliance.
• The intended use is described in this manual.
The use of any accessory or attachment or the
performance of any operation with this appliance
other than those recommended in this instruction
manual may present a risk of personal injury.
• Retain this manual for future reference.
Using your appliance
Always take care when using the appliance.
• This appliance is not intended for use by young or
infirm persons without supervision.
• The appliance is not to be used as a toy.
• Do not open body casing. There are no user-
serviceable parts inside.
• Do not operate the appliance in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust.
After use
• When not in use, the appliance should be stored
in a dry, well ventilated place out of the reach of
children.
• Children should not have access to stored
appliances.
• When the appliance is stored or transported
in a vehicle it should be placed in the boot or
restrained to prevent movement following sudden
changes in speed or direction.
• The appliance should be protected from direct
sunlight and heat.
Inspection and repairs
• Before use, check the appliance for damaged
or defective parts. Check for breakage of parts,
damage to switches and any other conditions that
may affect its operation.
• Do not use the appliance if any part is damaged
or defective.
• Have any damaged or defective parts repaired or
replaced by the manufacturer.
• Never attempt to remove or replace any parts
other than those specified in this manual.
Specific safety instructions for
spotlights
• Allow the spotlight to fully cool down before
storage.
• Keep combustible materials away from spotlight
lens. Extreme heat can cause fires.
• Never place the light face-down on any surface
when it is switched on or cooling.
• Do not leave the spotlight unattended. Keep
children and animals away from the work area.
• Inspect the lens for damage following impact or if
the spotlight is dropped. Do not operate without
the lens in place or with a damaged lens.
• Never look directly into the light or shine the light
into another person's eyes.
Instructions pertaining to waterproof
spotlights
The rubber O-ring acts to preserve the waterproof
qualities of the spotlight. The O-ring contacts the
end cap to prevent water from entering the gap. An
undamaged rubber O-ring, rubber ring guard and
lens, and proper sealing of the end cap before use
are very important.
Caution! To reduce the risk of property damage:
• Attempting to remove the rubber O-ring; use
of the unit with a damaged O-ring, rubber ring
guard or lens; improper sealing of the waterproof
end cap; and/or submerging this unit in depths
greater than 1.8 meters may cause the unit to no
longer be waterproof. Do not submerge the unit
if these conditions exist or the unit could sustain
permanent damage.
• Submerging this unit in depths greater than 1.8
meters and/or operating it in water temperature
other than between 5ºC and 40ºC could result
in leakage, warping or malfunction, causing
permanent damage to the spotlight.
FEATURES
This appliance includes some or all of the following
features:
1. Rubber O-ring
2. Translucent waterproof end cap
3 3
4/10/2012 6:40:53 PM