Keypad Facility - iPECS -LIK Feature Description & Operation

iPECS-LIK
Feature Description & Operation Manual
To activate CLIR or COLR, before placing or answering an ISDN call
1. Press the {CLIR} or {COLR} Flex button.
Conditions
1. This feature may not be available in the specific ISDN service area or may be a
subscription service.
Programming
STATION
CO/IP
ISDN/ICLID
Related Features
Hardware
 ISDN gateway Module

4.15.3 Keypad Facility

Description
The ISDN Keypad Facility Information Element (IE) may enable the user to activate certain
ISDN services (e.g. Off-Net Forward). To access this facility, the station must be enabled and
have a Flex button for {KEYPAD FACILITY}. When activated, the digits dialed by a user are
sent in the Keypad Facility IE instead of the Called Party Number IE.
Operation
iPECS Phone
To program {KEYPAD FACILITY} button;
1. [PGM] + {FLEX} + [PGM] + "89" + [SAVE]
To activate the keypad facility while on an ISDN line
1. Press the {KEYPAD FACILITY} button.
2. Dial desired digits, other actions disable Keypad facility feature.
Conditions
1. This feature can be activated or deactivated only after a CO line (ISDN) is seized.
2. Once activated, the system will continue to send dialed digits as Keypad Facility IE
messages regardless of ISDN messages. Thus, in the connected mode, DTMF
tones are not sent to the connected party, only the keypad message is sent.
3. If a Speed Dial bin includes [MSG/CALLBK] button as the first entry, the remaining
digits in the Speed Dial number will be sent in a Keypad Facility IE.
1 CLIP LCD Display (PGM 114-Btn 1)
2 COLP LCD Display (PGM 114-Btn 2)
1 COLP Table Index (PGM 143-Btn 1)
2 Type of Calling Number (PGM 143-Btn 4)
3 CLIP Print to Serial Port (PGM 200-Btn 2)
303
Issue 6.0d1