Choosing The Right Dye-Film Ribbon - Magicard Tango 2e User Manual

RIO 2e, TANGO 2e & TANGO +L Printers USER MANUAL

3. Choosing the right Dye-Film Ribbon

LC1
dye-film is the appropriate choice for colour printing with both Rio 2 and Tango 2 printers.
•
LC8
dye-film, for the Tango 2 models only, is more economic when printing in colour on one side and
•
black on the other.
LC6/LC3
dye-film - where cost is critical, monochrome printing is a fraction of the cost of colour printing.
•
The table below is a guide to selecting the best dye-film to use for any intended application.
Your
Full colour cards
Printer
or monochrome
Full Colour
Monochrome:
Black
Red
Blue
Green
Gold
Silver
White
Black & Overcoat
Colour front & Black back
Colour front & color back
Ribbon Panel Layout Key: Y=yellow, M=magenta, C=cyan, K=resin, O=overcoat (No Colour)
Cards
Ribbon
Per
Choice
ribbon
LC1 350 one side only
LC3 1000 one side only
LC6 600 one side only
LC8 300 front & back
LC1 175 Front & Back
Page 11 of 33
www.magicard.com
Ribbon
Panel Part Number
layout
YMCKO M9005-751
M9005-753
M9005-753-1
M9005-753-2
K
M9005-753-3
M9005-753-5
M9005-753-6
M9005-753-7
KO M9005-756
YMCKOK M9005-758
YMCKO M9005-751