Siemens SCALANCE X-200 Operating Instructions Manual page 24

Description of the device
2.4 The C-PLUG
Diagnostics
The following events are signaled by the diagnostics mechanisms of the X-200, such as
LEDs, WBM etc.:
● Inserting a C-PLUG that contains the configuration of an incompatible device type.
● The accidental removal of a C-PLUG
● General malfunctions of the C-PLUG.
The C-PLUG does not ship with the product
The C-PLUG is not supplied with the X-200 IE switch. It is an optional accessory available
under the following order number: 6GK1 900-0AB00.
Inserting in the slot
NOTICE
• Insert and remove the C-PLUG only when power is off.
• In a device with a varnished printed circuit board, you may only use a C-PLUG with a
Figure 2-2
24
varnished board.
C-PLUG and slot
Operating Instructions, 03/2015, C79000-G8976-C284-06
SCALANCE X-200