Newland NL-8300 User Manual page 16

Selecting the download type
This tool supports downloading of 3 different files: user program, key program and normal
file. They will be downloaded into different storage space respectively, i.e., User Program
will be downloaded into the user program space(up to 320 kB), Key Program will be
downloaded into the key management program space(up to 64 kB), while normal files will be
download into the flash file system space(up to 2MB).
Adding a file for downloading.
Click on the Append button, a file browse window will be shown for you to locate your
download target file.
Starting a download session
Click on the Get Ready(W) button to start a download session.
Batch downloading
This tool support batch downloading of multiple files of different download type, i.e., you
can select ,
Stopping/Cancelling a download session and closing the
COM port
Click on the Stop(S) button to stop/cancel a download session or close the COM port.
Selecting the COM port
Click on the pulldown list Port to select a suitable com port for download. Notice that you
cannot change the COM port setting after a download session has been started.
Downloading time to POS
When downloading the User Program or the Key Program, the current time of the host
download machine will be sent along to the POS. This function greatly facilitates the setting
of the machine's real time clock. Be sure to check the Download Time item to enable this
function.
PinCode
PinCode is the password for download. Every maching is shipped with a default download
password: 159951. You can change the PinCode through the SETUP function of the POS. If
you change the POS's PinCode, be sure to change PinCode setting of the POSDOWNLOAD
for a successful download.