Startup/Operation/Shut Down/Reboot - Newland NL-8300 User Manual

2.3 Startup/Operation/Shut down/reboot

2.3.1 Startup
Press " " button of keyboard for 3-5 sec
2.3.2 Operation
After starting, about 5 seconds the POS will entry the trade program. If the users don't want to
wait for 5 seconds or after 5 second the program still not running, user can press ENTER to
entry the trade program by manual.
2.3.3 Shut down
Press " " button of keyboard for 3-5 sec will shut the POS down.
When POS is using alone can use the built-in power source, when power is use up, the LCD
will display the signal, but if the user put the POS into the Base or connect to the outboard
power source, it will become normal, also is not influence the charge.
The POS support auto saver function, and will display Enter Power saving state, press any
key to resume.
2.3.4 reboot
If there are some special reason to let the POS fail to use, can use startup and shut down to
reboot the POS.