Initial Programming - Avaya IP401 Installation Manual

Initial Programming

Initial Programming
All the software used to configure and manage the IP Office system must be installed on your PC from
the supplied Administrator CD. With the initial assembly completed (see
and your PC connected to the IP Office system, insert and run the Administrator (CD 1 of 3) to install
Software Level 2.0+ on your PC.
1. The CD Autoruns. You are initially presented with the option to select which language you wish to
use. Select the language from the pull down list and click OK.
2. If not already installed on your PC, you are then given the option to install the Microsoft Net 1.1
Framework application. This should be installed if you wish to use the IP Office Installation
Wizard application. If you are going to install this application, then click OK, agree to the License
and on completion click OK. The Welcome screen is then displayed; click Next to continue.
3. The Destination folder location option menu is displayed. Either accept the default location (click
on Next) of where the Administration Suite is to be installed or change the location by clicking on
Browse and entering a new location
4. Select which components you wish to install by selecting the appropriate boxes (Manager and
Voice Mail are default minimums) and click Next.
5. Name the program folder or accept the default (IP Office), click Next and wait for the
Administration Suite installation to be completed.
6. Installation runs and on completion select Restart now and click Finish twice.
7. The IP Office Administration suite of applications is now installed on your PC and you are now
ready to configure your Avaya IP Office.
8. You have two choices:
• Using the IP Office Installation Wizard
•
Using the IP Office Manager Application
Installation Manual
IP Office 2.1
Basic System Programming
Rack Mounting Barrier
40DHB0002USCL Issue 10c (11th May 2004)
Boxes)
Page 59