Advertisement
SERVICE CHECKS
Normal spray pattern
problem
Will not spray
Improper spray pattern
Jerky or fluttering spray
Fluid leaking from
Packing Gland (18)
Dripping from fluid tip
ACCESSORIES
Part No.
DAH-10
Air Hose Set (10m)
DPH-10-2
Fluid Hose Set (10m)
DPT-20H
Pressure Tank (20)
DIVISION
Ransburg Japan KK
HP http://www.carlisleft.co.jp
®D
VILBISS is a registered trademark of Carlisle Fluid Technologie
E
®Jupiter is a registered trademark of CFT Ransburg Japan KK.
Cause
No pressure to gun.
Adjusting Screw (16) not properly adjusted.
A,B - Material build up on the Air Cap or Fluid Tip.
C,D - Incorrect fluid delivery or viscosity.
Insufficient material in the cup or Loose connector.
Gun fluid passage plugged.
Worn Needle Packing (17).
Loose or damaged Fluid Tip (4).
Loose Packing Gland (18).
Worn or damaged Needle Packing (17).
Worn or damaged Fluid Tip (4) or Needle (14).
Stuck Needle Packing (17) or Needle (14).
Tight Packing Gland (18).
Loose Adjusting Screw (10).
Description
s.
Check air and material lines.
Adjust.
A,B - Clean the Air Cap or Fluid Tip.
C,D - Adjust.
Fill cup or tighten the Connector.
Clean.
Replace.
Tighten or replace.
Adjust Packing Gland (18).
Replace.
Replace.
Lubricate.
Adjust.
Tighten.
Part No.
HAV-502-B
SSL-10
42884-214-K5 Cleaning Brush (kit of 5)
©2017 Carlisle Fluid Technologies.
4
Correction
Description
Air Adjusting Valve with Gauge
Gun Lube (60m)
2017-07- LUNA-MARKⅡ-K
Advertisement
