Report Optical Fiber Breakage - Zhone MXK Hardware Installation Manual

System Cables and Connectors

Report optical fiber breakage

62
MXK Hardware Installation Guide
1
Using the extension tube supplied with the inert dusting gas, blow into the
optical port to remove any accumulated dust and debris. Do not allow the
tube to touch the bottom of the optical port.
2 Using a swab with a small head, such as TexWipe Microswab, and
optical-grade isopropyl alcohol, wipe out the optical port.
3
Recap or reconnect the receptacle promptly to avoid contamination.
Check for proper system function.
Reporting optical fiber breakage
When an accidental break in the fiber feeder cable occurs, take the following
steps:
1 Notify both central-office and field-repair personnel of the problem.
2
Identify to central-office personnel what fibers are damaged.
3
Power off all laser sources related to the damaged fibers (whether located
at the central office, subscriber premises, or remote location).