Blockages - Russell Hobbs Pet Turbobag 2400 User Manual

C BLOCKAGES
48 No matter how careful you are, sooner or later you'll block the
cleaner.
C DON'T PANIC!
If the cleaner starts to get noisy and you start to lose suction, don't
worry, it's not the end of the world, you've probably just blocked it.
1 Switch the cleaner off and unplug it.
2 Spread a newspaper on the floor, you're going to make a mess.
3 If you're using one of the tools, remove and check it first.
4 Pull the hose out and check it.
5 Use something blunt, like the blunt end of a ball-point pen to
dislodge any blockage.
6 Check the bag – if it's full, replace it.
7 Check the filters.
8 If you haven't cleared the blockage by now, try again.
9 Still not clear? – Ring the helpline.
8