Table of Contents
Advertisement
C CLEANING
17 Move the tool over the surface, cleaning a small area at a time.
18 When you move to a new area, overlap the previous area.
C FINISHED?
19 Press and release the on/off switch 3, to turn the cleaner off.
20 Unplug the cleaner (switch the socket off first).
21 Press the C button, and hold it in – the cable will rewind.
22 Keep clear of the cable. If it catches on anything, stop pressing,
and it'll stop rewinding.
23 We've tried not to make it too powerful, to avoid wrecking your
home, so you may need to push the plug end in manually.
C SUCTION LIGHT
24 The suction light, on top of the cleaner, glows if the cleaner is
stressed, then goes out as the stress is removed.
a) unless it glows steadily, you needn't worry about it
b) it may flicker while you're cleaning, as the load changes
c) it may pulse with the turbo brush, as the load varies more
d) it'll glow steadily if you block the hose – move the hose
e) it'll glow steadily if you let the bag get full – stop and replace it
f) it'll glow steadily if there's a blockage – stop and clear it
C REMOVING THE BAG
25 Keep an eye on the suction light, and change the bag when it's
full, otherwise you'll choke the cleaner.
26 Switch off, unplug, and let the dust settle for a minute.
27 Squeeze the locks on either side of the hose end, and pull the
hose out of the cleaner.
28 Squeeze the latch in towards the lid, then raise the lid.
29 Grip the card part of the bag, slide it up and out of the bag holder,
then lower the bag gently into the dustbin..
, Don't handle the bag itself – you might squeeze or burst it.
30 Don't try to empty and reuse the bag. It takes quite a pounding
from the action of the cleaner, and from the dirt hitting it. Oils in
your skin weaken it further, so it might burst inside the cleaner.
6
Hide quick links:
Advertisement
Table of Contents
