Fitting The Hose; Cable; Carrying And Moving The Cleaner; Choose The Tool For The Job - Russell Hobbs Pet Turbobag 2400 User Manual

12 Don't use the cleaner for any purpose other than those described
in these instructions.
13 Don't use accessories or attachments unless we provide them.
14 Don't leave the cleaner in sunlight, UV can damage plastics.
15 Don't use the cleaner if it's damaged or malfunctions.
16 If the cable or plug is damaged, return the cleaner to avoid hazard.
U COUNT THE BITS
You should have an extendable tube, a turbo brush, a big brush, a
crevice tool, a small brush, a sofa brush, a hose, and spare bags –
check all the packaging before you dispose of it.
C FITTING THE HOSE
1 Push the hose end into the inlet.
2 You'll hear a click as it locks into position.
C CABLE
3 Pull as much cable as you need from the back of the cleaner.
4 The yellow band round the cable tells you there's a metre left.
5 The red band tells you "Stop pulling, you've run out of cable!".
6 Watch the cable so it doesn't catch on anything, or trip anyone.
C CARRYING AND MOVING THE CLEANER
7 Lift the cleaner only by the carrying handle.
8 When the cleaner is sitting on its wheels (normal position), you
can move it around by pulling gently (that's gently), on the hose.
9 For stationary jobs like curtains, you may sit the cleaner
upright, with the handle uppermost, but don't try to move
it around like this, it'll fall over.
C CHOOSE THE TOOL FOR THE JOB
10 The tools will fit on the nozzle, or the end of the inner tube.
big brush
household use only
used with the tubes, for floors and carpets:
Press the rear of the pedal to extend the bristles for
floors with little or no pile. Press the front to retract
the bristles for rugs, carpets, and anything with pile.
4