Specifications - Makita TD126D Instruction Manual

ENGLISH (Original instructions)
1-1. Red indicator
1-2. Button
1-3. Battery cartridge
2-1. Switch trigger
3-1. Lamp

SPECIFICATIONS

Capacities
No load speed (min
Impacts per minute
Battery cartridge
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for screw driving in wood, metal
and plastic.
Noise
The typical A-weighted
according to EN60745:
Model TD126D
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
Model TD127D
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
Wear ear protection
Vibration
The vibration total
determined according to EN60745:
Model TD126D
Work mode : impact tightening of fasteners of the
maximum capacity of the tool
Vibration emission (a
Uncertainty (K) : 2.0 m/s
Explanation of general view
4-1. Reversing switch lever
6-1. Bit
6-2. Sleeve
7-1. Bit
7-2. Bit-piece
Model
Machine screw
Standard bolt
High tensile bolt
-1
)
Overall length
Net weight
Rated voltage
noise level determined
) : 92 dB (A)
pA
) : 103 dB (A)
WA
) : 93 dB (A)
pA
) : 104 dB (A)
WA
value (tri-axial vector
2
) : 9.5 m/s
h
2
TD126D
0 - 2,400
BL1411G / BL1413G
1.4 kg
D.C. 14.4 V
ENE033-1
Model TD127D
Work mode : impact tightening of fasteners of the
maximum capacity of the tool
ENG905-1
Vibration emission (a
Uncertainty (K) : 2.0 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
ENG900-1
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
sum)
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
3
7-3. Sleeve
8-1. Groove
8-2. Hook
8-3. Screw
10-1. Vent
TD127D
4 mm - 8 mm
5 mm - 14 mm
5 mm - 12 mm
0 - 2,300
0 - 3,000
173 mm
BL1811G / BL1813G
1.5 kg
D.C. 18 V
2
) : 8.5 m/s
h
2
ENG901-1