Removing And Fitting The Battery - Tait TP9100 Service Manual

5.1

Removing and Fitting the Battery

Removing the
1.
Battery
2.
Fitting the Battery
1.
2.
Figure 5.1
102 Disassembly and Reassembly
Simultaneously squeeze both battery catches inwards to release the
catch mechanism.
Tilt the top of the battery outwards and lift the lugs at the bottom of
the battery out of the holes at the bottom of the radio.
Insert the lugs at the bottom of the battery into the holes at the bot-
tom of the radio.
Push the top of the battery towards the radio until the catch
mechanism snaps in.
Removing the battery from the radio
TP9100 Service Manual
© Tait Electronics Limited May 2005