Disassembly And Reassembly - Tait TP9100 Service Manual

5

Disassembly and Reassembly

Overview
This section describes how to:
Important
General
Disassemble only as much as necessary to replace the defective parts.
Inspect all disassembled parts for damage and replace them, if necessary.
Observe the torque settings indicated in the relevant figures.
For information on spare parts, refer to
TP9100 Service Manual
© Tait Electronics Limited May 2005
remove and fit the battery
disassemble and reassemble the battery catch
disassemble and reassemble the radio
Before disassembling the radio, disconnect the radio from
any test equipment or power supply.
"Spare Parts" on page 289.

Disassembly and Reassembly

101