Parts Ordering; Parts Kits - Emerson Fisher 3582i Instruction Manual

Positioners, electro-pneumatic converter, and valve stem position transmitter
Table of Contents

Advertisement

3582, 582i, and 3583
January 2013
6. Plug the output connection and apply 2.4 bar (35 psig) to the supply pressure connection.
CAUTION
Do not apply a signal greater than 35 mA to the I/P module. Higher signal values may damage the converter module.
7. Apply a 20 milliampere DC current input signal to the converter.
8. Check for leaks using a soap solution. Check any components which were disassembled or disconnected.

Parts Ordering

A serial number is assigned to each valve positioner or valve stem position transmitter and is stamped on the
nameplate. Always refer to this number when corresponding with your Emerson Process Management sales office
regarding spare parts or technical information. When ordering parts, also give the eleven‐digit part number shown in
the following parts list.
WARNING
Use only genuine Fisher replacement parts. Components that are not supplied by Emerson Process Management should
not, under any circumstances, be used in any Fisher instrument. Use of components not supplied by Emerson Process
Management may void your warranty, might adversely affect the performance of the instrument, and could cause personal
injury or property damage.

Parts Kits

Description
Repair kit for positioner/transmitter (not for 3582NS)
 Kit contains keys 11, 16, 17, 33B, 34C, 73, and 104.
 This kit also contains keys 18C, 18E, and 18F
  for 3580 and 3581 positioners
   For standard temperature applications
   For high temperature applications
Repair kit w/nozzle and flapper for the 3582 Positioner
 Kit contains keys 11, 16, 17, 18, 19B, 19E,
  33B, 34C, 73, and 104.
   For standard temperature applications,
    not for 3582NS
   For high temperature applications,
    not for 3582NS
   For 3582NS, contains EPDM parts
40
Part Number
R3580X00022
R3580X00032
R3582X00012
R3582X00022
R3582X00032
Description
Repair kit for 582i electro‐pneumatic converter
 Kit contains keys 3, 5, 6, 8, 20, and 23
Replacement kit for 83L Relay
 Kit contains relay, gaskets and mounting screws (key 32 in
  figure 21, keys 10, 13, and 15 in figure 23)
   For 3582 except 3582NS, std. const.
   For 3582 except 2825NS,
    Remote Vent, std. temp.
   For 3582 except 3582NS,
    hi‐temp. const.
   For 3582 except 3582NS,
    Remote Vent, hi‐temp.
   For 3582NS
   For 3583, std. const.
   For 3583, hi‐temp. const.
Instruction Manual
D200138X012
Part Number
R582X000012
R3580XRS012
R3580XRR012
R3580XRH012
R3580XRR022
R3580XNS012
R3580XRS022
R3580XRH032

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents