Disassembly Procedure - Mitsubishi Electric PLA-RP35EA Service Manual

11 11

DISASSEMBLY PROCEDURE

DISASSEMBLY PROCEDURE
PLA-RP35EA.UK
PLA-RP71EA.UK
OPERATING PROCEDURE
1. Removing the filter
(1) Slide the knob of air intake grille toward the arrow to
open the air intake grille. (See Figure 1)
(2) Pull down the lever of the air intake grille to remove the
filter. (See Figure 2)
2. Removing the air intake grille
(1) Slide the knob of air intake grille toward the arrow to
open the air intake grille. (See Figure 1)
(2) Remove the hook of drop prevention strap from the
panel.
(3) Remove the air intake grille.
3. Removing the electrical box cover
(1) Remove the air intake grille and the filter. (Refer to
procedure 2)
(2) Loosen the 2 electrical box cover fixing screws
(M4×10) approximately 2 to 3 mm. (See Photo 1)
(3) Slide the electrical box cover toward the arrow to
remove. (See Photo 2)
OCH626A
PLA-RP50EA.UK
PLA-RP100EA.UK
Hook of drop
prevention strap
PLA-RP60EA.UK
PLA-RP125EA.UK
Be careful when removing heavy parts.
PHOTOS & ILLUSTRATIONS
Air intake grille
Figure 1
Figure 2
Electrical box cover
Photo 1
Photo 2
38
PLA-RP140EA.UK
Knob
Grille
Filter
Intake grille
fixing screws
Electrical box cover
Slide